DeltaQuad Pro operations manual v2
  • Introduction
  • Vehicle specifications
  • Video instructions
  • DeltaQuad Simulator
  • Setup
    • Assembly
    • Battery
    • Telemetry & Ground Control
    • Key parameters
    • Safety features
    • Integrating payloads
  • Flight
    • Radio range and Line of sight (LOS) operation
    • Ground Control Station overview
    • Planning a mission
    • Pre-flight checks
    • Executing and monitoring a mission
    • Manual override
    • Post-flight
  • Maintenance
    • Sensor calibration
    • Firmware upgrade
    • Battery charging and storage
    • Flight logs
    • Preventative maintenance
    • Scheduled maintenance
    • Wiring diagram
  • DELTAQUAD PRO #VIEW
    • DeltaQuad Controller
    • Booster Package and Antenna Installation
    • Controlling the vehicle
    • Controlling the camera
    • Target tracking & following
    • Transmission modes and stream rates
    • Changing camera settings
    • Connecting a second screen
    • Using the Camera Control Laptop
      • Wi-Fi network connection
      • VPN-based connection
      • Controller hotspot connection
  • DELTAQUAD PRO #MAP
    • DeltaQuad Controller
    • Controlling the vehicle
    • Planning survey missions
    • Configuring your camera
    • Geo-referencing
    • Connecting a Secondary Control Terminal
  • DELTAQUAD PRO #INSPECT
    • DeltaQuad Controller
    • Controlling the vehicle
    • Configuring your camera
  • DELTAQUAD PRO #CARGO
    • DeltaQuad Controller
    • Booster Package and Antenna Installation
    • Payload Drop Mechanism
Powered by GitBook
On this page
  • Manual Grid
  • Geotagging
Export as PDF
  1. DELTAQUAD PRO #MAP

Planning survey missions

PreviousControlling the vehicleNextConfiguring your camera

Last updated 1 year ago

A survey allows you to create a grid flight pattern over a polygonal area. You can specify the polygon as well as the specifications for the grid and camera settings appropriate for creating geotagged images. To set up your camera for mapping please see

To draw the polygon for your survey, click the "Draw" button and click on the map to set polygon vertices.

There are multiple options for a survey grid. You can select the main option from the dropdown at the top of the editor.

Manual Grid

The Manual Grid option allows you to specify all the values for generating the grid pattern over the polygon by hand.

  • Grid angle - The angle for the parallel flight tracks of the grid. For example, 0 degrees will generate parallel lines that travel north/south.

  • Grid spacing - The distance between each parallel flight track.

  • Altitude - The altitude to fly the entire grid pattern.

  • Turnaround distance - The amount of additional distance to fly past the edge of the polygon before performing the turnaround for the next flight track.

  • Trigger Distance - Used to trigger an image taken by the camera based on the distance flown.

Geotagging

Please refer to the section.

Geo-referencing
this instruction video