DeltaQuad Pro operations manual v2
  • Introduction
  • Vehicle specifications
  • Video instructions
  • DeltaQuad Simulator
  • Setup
    • Assembly
    • Battery
    • Telemetry & Ground Control
    • Key parameters
    • Safety features
    • Integrating payloads
  • Flight
    • Radio range and Line of sight (LOS) operation
    • Ground Control Station overview
    • Planning a mission
    • Pre-flight checks
    • Executing and monitoring a mission
    • Manual override
    • Post-flight
  • Maintenance
    • Sensor calibration
    • Firmware upgrade
    • Battery charging and storage
    • Flight logs
    • Preventative maintenance
    • Scheduled maintenance
    • Wiring diagram
  • DELTAQUAD PRO #VIEW
    • DeltaQuad Controller
    • Booster Package and Antenna Installation
    • Controlling the vehicle
    • Controlling the camera
    • Target tracking & following
    • Transmission modes and stream rates
    • Changing camera settings
    • Connecting a second screen
    • Using the Camera Control Laptop
      • Wi-Fi network connection
      • VPN-based connection
      • Controller hotspot connection
  • DELTAQUAD PRO #MAP
    • DeltaQuad Controller
    • Controlling the vehicle
    • Planning survey missions
    • Configuring your camera
    • Geo-referencing
    • Connecting a Secondary Control Terminal
  • DELTAQUAD PRO #INSPECT
    • DeltaQuad Controller
    • Controlling the vehicle
    • Configuring your camera
  • DELTAQUAD PRO #CARGO
    • DeltaQuad Controller
    • Booster Package and Antenna Installation
    • Payload Drop Mechanism
Powered by GitBook
On this page
Export as PDF

Flight

This chapter covers the command and control features of the vehicle.

Chapter index

  • Ground Control Station overview

  • Planning a mission

    • Survey missions

  • Pre-flight checks

  • Executing and monitoring a mission

  • Post-flight

PreviousIntegrating payloadsNextRadio range and Line of sight (LOS) operation

Last updated 1 year ago