This section gives general information about the Raptor 360 payload and how to install it.
The Raptor is a lightweight long-range dual EO-IR stabilized camera turret. It features a significant IR range increase and an X80 EO zoom.
The Raptor 360 can be installed in a single payload configuration or together with the auxiliary battery payload.
When using the Raptor 360 in a single payload configuration, it must be installed in payload slot 1 at the rear of the vehicle (near the pusher motor).
When using the Raptor 360 with the auxiliary battery, the auxiliary battery must be installed in payload slot 1, as it is the heaviest payload, and the Raptor 360 must be installed in payload slot 2.
For more information please review the chapter Auxiliary Battery Placement.
Each payload box features two arrows on top of each handle, corresponding to arrows on each side of the DeltaQuad Evo's payload bay. The arrows on the payload boxes must align with those in the payload bay, always pointing toward the front (nose) of the vehicle.
Each payload box has handles with two locking pins positioned opposite each other. To remove the payload box, grasp the handles with both hands, press the locking pins inward, and pull the payload box out.
The payload box contains the camera and its onboard computer, the Trip 2. On top of the Trip 2, there is a micro SD card slot that accommodates cards of up to 32GB for onboard storage.
If onboard media storage is required, ensure that a compatible micro SD card is installed in the Trip 2 board computer and has sufficient available storage space.
ZOOM
X80 (X40 + X2 digital)
FOV
60° WFOV – 1.5° NFOV – 0.75° DFOV
THERMAL RESOLUTION
1280×720
PITCH FOR
-45° to +80°
YAW/ROLL FOR
360° Continuous
WEIGHT
850 grams (complete payload)
