This section describes how to use the Camera Control Laptop with a local connection.
Connect the DeltaQuad Controller to an internet connection as described in the manual here.
Connect the Camera Control Laptop to the same Wi-Fi network or hotspot.
On the DeltaQuad Controller, open CCA3 and wait until a connection with the DeltaQuad Pro has been established.
You need to find the IP address given to the DeltaQuad controller by the Wi-Fi network.
On the DeltaQuad Controller, go to the settings.
Scroll down to About phone.
Go to Status.
Go to the section where the IP address is stated.
The stated IP address needs to be filled into the blank field of the Connection Manager on the Camera Control Laptop. Select the option IP Address and click on Connect.
On the Camera Control Laptop open CCA3. A connection should be established within a few seconds.
