DeltaQuad Evo ENT operations manual
  • DeltaQuad Evo Enterprise Edition
  • Introduction
  • Vehicle specifications
  • Auterion Suite
    • Create an Auterion Suite account
    • Activating your vehicle
    • Using the DeltaQuad Evo simulator
  • Setup
    • DeltaQuad Evo flight case
    • Assembly
    • Replacing the propellers
    • DeltaQuad Evo battery
      • Battery handling
      • Charging and storing the battery
      • Battery placement
      • Powering the vehicle
    • Safety features
  • Flight
    • DeltaQuad Controller
      • Controlling the vehicle
      • Connecting a secondary Control & Command Terminal
      • Controller factory reset
      • Pairing the DeltaQuad Controller with the air unit
    • Radio range and Line of sight (LOS) operation
    • Ground Control Station overview
      • Fly View
      • Plan View
    • Planning a mission
      • Preparing a mission plan
      • Best practices and tips
      • Mission Start Action
      • Set intermediate waypoints
      • Mission End Action
    • Pre-flight Checks
    • Executing and monitoring a mission
    • Post-flight
  • Maintenance
    • DeltaQuad Evo maintenance kit
      • VTOL Arm change
      • Pusher Motor Pod change
      • Wingtip change
    • Elevon change
    • Sensor calibration
    • Firmware upgrade
    • Flight logs
    • Preventative maintenance
  • DeltaQuad EVO payloads
    • NextVision
      • Raptor
      • Nighthawk2-V/UZ
      • Controlling the camera
      • Connecting a second screen
Powered by GitBook
On this page
  • After every flight
  • After 200 flights or 12 months
  • Replacing components
Export as PDF
  1. Maintenance

Preventative maintenance

To keep your DeltaQuad EVO in proper condition the following steps should be taken:

After every flight

  • Clean the propellers of any dirt and inspect for damage.

  • Clean the fuselage and wings, this will improve performance.

  • Inspect the avionics, and make sure all components are still securely attached in their proper place and all connectors are securely fastened.

After 200 flights or 12 months

To keep your vehicle in the best condition and safe to operate beyond this point scheduled maintenance should be performed. A maintenance kit can be ordered from your DeltaQuad representative.

Replacing components

The DeltaQuad EVO has been designed to allow easy replacement of components. Every component on the DeltaQuad EVO is available as a replacement part.

The maintenance kit includes detailed instructions on all replacement parts.

PreviousFlight logsNextDeltaQuad EVO payloads

Last updated 1 year ago