DeltaQuad Evo ENT operations manual
  • DeltaQuad Evo Enterprise Edition
  • Introduction
  • Vehicle specifications
  • Auterion Suite
    • Create an Auterion Suite account
    • Activating your vehicle
    • Using the DeltaQuad Evo simulator
  • Setup
    • DeltaQuad Evo flight case
    • Assembly
    • Replacing the propellers
    • DeltaQuad Evo battery
      • Battery handling
      • Charging and storing the battery
      • Battery placement
      • Powering the vehicle
    • Safety features
  • Flight
    • DeltaQuad Controller
      • Controlling the vehicle
      • Connecting a secondary Control & Command Terminal
      • Controller factory reset
      • Pairing the DeltaQuad Controller with the air unit
    • Radio range and Line of sight (LOS) operation
    • Ground Control Station overview
      • Fly View
      • Plan View
    • Planning a mission
      • Preparing a mission plan
      • Best practices and tips
      • Mission Start Action
      • Set intermediate waypoints
      • Mission End Action
    • Pre-flight Checks
    • Executing and monitoring a mission
    • Post-flight
  • Maintenance
    • DeltaQuad Evo maintenance kit
      • VTOL Arm change
      • Pusher Motor Pod change
      • Wingtip change
    • Elevon change
    • Sensor calibration
    • Firmware upgrade
    • Flight logs
    • Preventative maintenance
  • DeltaQuad EVO payloads
    • NextVision
      • Raptor
      • Nighthawk2-V/UZ
      • Controlling the camera
      • Connecting a second screen
Powered by GitBook
On this page
Export as PDF

Maintenance

PreviousPost-flightNextDeltaQuad Evo maintenance kit

Last updated 10 months ago

This chapter covers the maintenance of your vehicle and the logging of your flights.

Chapter index

Sensor calibration
Firmware upgrade
Flight logs
Preventive maintenance