DeltaQuad Evo ENT operations manual
  • DeltaQuad Evo Enterprise Edition
  • Introduction
  • Vehicle specifications
  • Auterion Suite
    • Create an Auterion Suite account
    • Activating your vehicle
    • Using the DeltaQuad Evo simulator
  • Setup
    • DeltaQuad Evo flight case
    • Assembly
    • Replacing the propellers
    • DeltaQuad Evo battery
      • Battery handling
      • Charging and storing the battery
      • Battery placement
      • Powering the vehicle
    • Safety features
  • Flight
    • DeltaQuad Controller
      • Controlling the vehicle
      • Connecting a secondary Control & Command Terminal
      • Controller factory reset
      • Pairing the DeltaQuad Controller with the air unit
    • Radio range and Line of sight (LOS) operation
    • Ground Control Station overview
      • Fly View
      • Plan View
    • Planning a mission
      • Preparing a mission plan
      • Best practices and tips
      • Mission Start Action
      • Set intermediate waypoints
      • Mission End Action
    • Pre-flight Checks
    • Executing and monitoring a mission
    • Post-flight
  • Maintenance
    • DeltaQuad Evo maintenance kit
      • VTOL Arm change
      • Pusher Motor Pod change
      • Wingtip change
    • Elevon change
    • Sensor calibration
    • Firmware upgrade
    • Flight logs
    • Preventative maintenance
  • DeltaQuad EVO payloads
    • NextVision
      • Raptor
      • Nighthawk2-V/UZ
      • Controlling the camera
      • Connecting a second screen
Powered by GitBook
On this page
Export as PDF
  1. Flight
  2. DeltaQuad Controller

Controller factory reset

The following section describes how to do a factory reset on the DeltaQuad Evo Controller.

PreviousConnecting a secondary Control & Command TerminalNextPairing the DeltaQuad Controller with the air unit

Last updated 1 year ago

If the DeltaQuad Controller is experiencing issues such as app malfunctioning, crashes, or general malfunctioning, performing a factory reset can often resolve these issues.

Follow the steps below to reset your controller to its factory settings:

  1. Power on the controller.

  2. Go to the Settings.

  1. Go to System.

  1. Navigate to Reset options.

  1. Choose Erase all data (factory reset).

This process might take a few minutes. After the factory reset, make sure that the controller and all apps work properly. If problems should persist, please contact [email protected].